Passive Harmonic Filters

FUSS-EMV Ing. Max Fuss GmbH & Co. KG

Passive Harmonic Filters by FUSS-EMV Ing. Max Fuss GmbH & Co. KG

Passive Harmonic Filters
This filter module ensures sinusoidal shaped main currents and reduces harmonics. Passive harmonic filters are an economical alternative solution to active systems for the compensation of harmonic distortion. Our filters are suitable for all devices with Six-pulse bridge rectifiers. They meet the standard EN 61558 and UL 508 requirements. It is possible to use a filter centrally for several inverters. The system losses are low, thus the filter does not reduce the dynamics of the drives. The power range is from 7 to 300 kW (10 to 433 A).

  • For 400 V mains with 50Hz;
  • other voltages and 60 Hz on request
  • THDi (Total Harmonic Distortion of Current) 10% or 16%
  • Rated currents from 10...450 A
  • Protection level IP00
Properties Passive Harmonic Filter
  • Small compact size
  • Reduces THDi to . 16% resp. 10%
  • Optional THDi = 5% (depends on application)
  • High Efficiency Factor
  • User-friendly installation, no programming or setup required

More Products in the Area of Harmonic Filters

Voltage controlled Active Filter
The universal Active Filter for higher electrical Power
  • Active Harmonic Filter
  • Compensation current up to 300 ARMS
  • Output...
Voltage controlled Active Filter
Ideal for testing of all kind of high voltage equipment like HV-cables, all types of transformers, bushings etc. Replaces the common motor-generator sets and...
Voltage controlled Active Filter
Active Harmonic Filter 19“ Design three-wire / four-wire technology
Arranges unmatched Power Quality and effi ciency by active compensation of harmonic c...
Voltage controlled Active Filter Industry
Provides hitherto unreached grid effi ciency and cost effectiveness due to active compensation of grid interferences, caused by frequency converters...
Voltage controlled Active Filter for WEC
The ISUVOC 100+WKA prevents the WEC from being shut down by the grid operator due to bad current quality and therefore ensures your rate of return....
Address
Johann-Hittorf-Strasse 6
12489
Berlin
Germany
Business Type
Manufacturer
Export Regions
Worldwide
Foundation
1908
Management
Dipl.-Ing. Volker Keddig

About FUSS-EMV Ing. Max Fuss GmbH & Co. KG

Topfit at the Centre of Science and Research
EMC test laboratory, development, production and direct shipment from Campus Adlershof.
Know-how cannot be replaced by anything. In 1986 we developed our first interference suppression filter - since then the specialists of the Ing. Max Fuss GmbH, FUSS-EMV, deal with EMC (Electromagnetic Compliance). Experience gained by the fabrication of electromechanical controllers, transformers and rectifiers from the company's foundation in 1908 was of advantage.

Nowadays our business activities devide in:
  • Interference Suppression Components
  • Power Quality
  • EMI-Filter for Renewable Energy
  • e-mobility
As a leading supplier in the field of EMC interference suppression these days we offer to our customers service and support oriented problem solving. As a medium-sized business we have lean management to provide short development periods, short production periods and times of delivery to the customer.
We engineered and manufactured in Germany. You can order our products directly to our service team.