Manfred Huck GmbH
Snow Fences (Art.-Nr. 7040) by Manfred Huck GmbH
The fence is made of rot-proof polyethylene knitted fabric with integrated flexible, fiberglass-reinforced polyester poles. The poles are fitted with polyamide caps and two eyelets for attaching the guy ropes. the delivery includes 18 ground sockets made of impact-resistant GRP, 36 steel ground anchors and 18 guy ropes each for the upper and lower guy ropes. The special mesh opening ensures optimum snow drifting and the high weather resistance makes the fences suitable for long-term outdoor use.
Use this fence as a snow guard fence for solid ground. Article 7040-2 can alternatively be used for loose soils!
Installation recommendation:
Roll out the fence, hammer in the ground sockets. Tighten each section individually before hammering in. Place the caps on the poles with tensioning cords. Caution! If possible, drive in ground anchors and ground sockets to their full length and set to full tension or tension. Do not forget the lower bracing.
The 50 m fences should be set up offset to each other to minimize the wind's impact and to allow game to pass.