Systea GmbH

Safety and energy efficiency – SYSTEA sub-structure systems offer more than just secure support. 

Through our contact with the industry, our systems recognise the demands of architects and designers, planners and facade installers. Along with our highly competent technical performance, our systems distinguish themselves in this way through efficient and economic assembly and installation.

The wall brackets play a major role in the specification of every suspended rear-ventilated facade. Our numerous profile systems can be combined with wall brackets made of aluminum, stainless steel or glass fiber reinforced polyamide to create a wide variety of solutions and thus meet all requirements for design, fire protection and energy efficiency.

Aluminium L-shaped wall brackets:
Non-flammable aluminium wall brackets made using alloy EN AW-6063 T66 have medium thermal conductivity (Class D to H). These are available in lengths from 40 mm to 320 mm and are used for fixing onto concrete/masonry or for wooden/metal frameworks.

• Aluminium U-shaped wall brackets:

• Stainless-steel L-shaped wall brackets:              Non-flammable stainless-steel wall brackets made using alloy EN 10088-2; 1.4162 have a low thermal conductivity (Class A+ to B). These are available in lengths from 120 mm to 400 mm and are used for fixing onto concrete/masonry or for wooden/metal frameworks. These are suitable for the Passivhaus method of construction.
• Stainless-steel U-shaped wall brackets:            These non-flammable stainless steel wall brackets made from alloy EN 10088-2; 1.4162 have a low thermal conductivity (Class A+ to B). They are available in lengths from 60 mm to 300 mm and are used for fixing onto concrete/masonry or wooden/metal frameworks. These are suitable for the Passivhaus method of construction.
• TEKOFIX wall bracket:                                       The barely flammable TEKOFIX wall bracket is made of the glass-fibre reinforced plastic PA66, which makes a very low thermal conductivity (Class A+ to A). The wall bracket is available in lengths from 100 mm to 350 mm and is used for fixing onto concrete/masonry or wooden/metal frameworks. These are suitable for the Passivhaus method of construction.