Systea GmbH
Profile system for visible fixing (ALKAPO) by Systea GmbH
Through using box-shaped carrier profiles, ALKAPO offers a significantly higher load-bearing capacity and is used whenever anchoring is only possible into the floor deck of the respective floor of the building. A sub-structure system based on ALKAPO is comprised of vertical carrier rails, U-shaped wall brackets and optional accessories. According to their thermal load and demand – the wall brackets are made of aluminium or stainless-steel. According to the static engineering demands, we can choose between the support profiles ALKAPO 275 and ALKAPO 350.
The fixing elements are fixed to the support profiles using screws, bolts or rivets.
The carrier profiles are connected to the wall brackets using rivets, or screws. when doing this, the sliding points accept the horizontal (wind) loads and fixed points take up horizontal and vertical loads (dead load). Constraint-free assembly is completed at the sliding points in vertical longitudinal holes. One fixed point is allocated per support profile.
Thermostop Elements are available as thermal dividers in order to minimise thermal bridging.
Cantilever projections up to 480 mm.
Material EN AW-6063 T 66
Aluminium profiles
ALKAPO 275-mid rail support
ALKAPO 275-joint profile
ALKAPO 350-mid rail support
ALKAPO 350-joint profile
More Products in the Area of Facade substructures
Facade substructures (TC 110 for ArGeTon®)
Profile system for concealed fixing of Argeton facade panels.
A sub-structure system based on TC110 is comprised of vertical L-shaped and T-shaped aluminium support profile...
Facade substructures (TC110 for Moeding)
Aluminium T-Profiles for Moeding
T 40 / 55
T 65 / 50
T 80 / 50
T 110 / 45
T 160 / 50
Aluminium L-Profiles for Moeding
L 42 / 50
L 45 / 45
Facade substructures (TC110 for NBK)
Aluminium T-Profiles for NBK
T 110 / 45
T 160 / 50
Special accessories for NBK
Clamp brackets NBK Terrart Light 24
Clamp brackets NBK Terrart Light 28
Clamp bracket...