SITEMA GmbH & Co. KG

Manufacturer
Germany
Website
Product inquiry
Phone

DIN EN ISO 9001
DIN EN ISO 14001
KFHL

Manufacturer
Germany
Website
Product inquiry
Phone

DIN EN ISO 9001
DIN EN ISO 14001
KFHL

Cylinder clamping unit (KFE) by SITEMA GmbH & Co. KG

Electric Locking Unit

The electric Locking Unit KFE is used as a stepless locking device on round rods and holds axial forces in both load directions without axial play. It is used where hydraulic or pneumatic solutions are not possible.

The holding force is created by the proven spring-operated clamping system as it is used in SITEMA’s hydraulically or pneumatically operated Locking Units. At a drop of the control voltage or in case of failure of the electric supply, the Locking Unit KFE clamps automatically. Therefore, it is also suitable for use in safety relevant applications.

To operate the Locking Unit KFE, a supply voltage of 24 V and a control signal for the input command “clamp/release” are sufficient.
The Locking Unit is self-monitoring and provides output signals that can be used in the control system of the application. These output signals inform about the state of the unit (“clamped” or “released”) and its health status.

Product advisor: Carsten Rother

More Products in the Area of Clamping units

At SITEMA there is nothing that does not exist!

From extremely small to very large clamping heads for rods up to 300 millimeters in diameter. Whether outdoors, in sub-zero temperatures, und...

More Information »