RAMVION | Kurtsahin Solutions

FUXUS 2-inch DN50 steel hydraulic ram – up to 100 m delivery head

FUXUS 2-inch ram pump – robust water pumping without electricity
The FUXUS hydraulic ram pump uses the energy of flowing and falling water to pump a portion of it to a significantly higher level. No electrical connection, motor, battery, or fuel is required for operation.

The robust 2-inch design is particularly suitable for applications with larger quantities of water available – for example, for irrigating fields and gardens, supplying water tanks, or for agricultural applications.

The working valve operates using spring tension. This allows the setting to be adjusted to the desired delivery head or flow rate. With proper installation, the system can be operated continuously.

The 2-inch version has a DN50 inlet and, under suitable site conditions, is designed for delivery heads of up to approximately 100 m. All technical data can be found under "Additional Information".

Especially important – the drive line
The correct design of the drive line is crucial for the function and pumping capacity of a hydraulic ram pump. Diameter, length, head, and available water volume must be coordinated.

Therefore, please refer to the enclosed operating instructions before installation and commissioning. These instructions describe in detail the dimensioning and adjustment of the drive cable.

Areas of application
Irrigation of gardens and fields, agriculture, animal husbandry, filling of higher-lying water tanks, and independent water supply at locations with suitable flowing water.

Scope of delivery
FUXUS 2" ram pump in the selected version as well as operating instructions or PDF instructions.

The drive pipe, delivery pipe and other installation-dependent components are not included in the scope of delivery unless expressly stated otherwise in the product description.