Product inquiry
Check valves for nominal pressures up to PN 420 bar
- pipe connection on both sides
- pipe connection/screw-in thread
- internal pipe thread on both sides GRSVI
- check valve internal parts
Leakage rate for check valves during hydraulic testing with test pressure
(= permissible operating pressure): 1 drop at a test time of 1 minute.
Features
- Cone check valves with sealing by 90° plunger with elastomer sealing disk.
- Stroke limitation, thus secured free outlet opening.
- opening process shock-absorbing and low-noise, without cross-sectional constriction.
- For types GERSV and GERSZ, the screw-in thread is sealed with a soft seal.
- Flow velocity must not exceed 8 m/sec., tests are required beyond this.
- Material / temperature: Steel
- Seals NBR -25°C to +100°C