CARL FUHR GmbH & Co. KG

multisafe 854 - Automatic multipoint locking with handle operation

The automatic function of the multisafe 854 conveniently replaces the need for handle-operated locks. Locking is achieved with just one turn of the key. A simple handle operation is sufficient to open the lock. Depending on requirements, the lock can be equipped with roller pins or a combination of swing bolts and roller pins. Matching continuous locking bars and individual locking parts are also available.

Locking: Locking takes place automatically when the door is closed. The main bolt is then extended with a turn of the key to secure the lock.

Unlocking from the outside and from the inside: For unlocking, the deadbolt is retracted with the cylinder key and then the other locking points are retracted by operating the lever handle downwards. The latch is retracted via the lever handle.

multisafe 856 - handle-operated multipoint locking system for side entrance doors

The lever-operated multisafe 856 is the optimum locking system for side entrance doors. The high force transmission when operating the handle ensures easy operation when locking and unlocking. The door can be opened from the inside and outside until the main latch is extended with the key.

Locking: The door is locked by operating the handle upwards. Then, to secure the lock, the main bolt is extended with one turn of the key.

Unlocking from outside and inside: For unlocking, the deadbolt is retracted with the cylinder key and then the other locking points are retracted by operating the lever handle downwards. The latch is retracted via the lever handle.

multisafe 859 - lever-operated multipoint locking system with split follower

The lever-operated multisafe 859 guarantees a high level of locking convenience combined with easy handling. It is suitable for both main and secondary entrance doors. The secondary locks are extended by pulling up the lever handle. They thus ensure the desired security and a permanent tightness of the door. Additional security plus: For opening from the outside, the latch can only be retracted using the cylinder key.

Locking:The latch is locked by operating the lever handle upwards. Then, to secure the latch, the main bolt is extended with one turn of the key.

Unlocking from the outside: To unlock, the deadbolt is retracted with the cylinder key and then the other locking points are retracted by operating the lever handle downward. The latch is retracted with the cylinder key.

Unlocking from the inside: For unlocking, the latch bolt is retracted with the cylinder key and then the further locking points are retracted by operating the lever handle downwards. The latch is retracted via the lever handle.

multisafe 869 - handle-operated multipoint locking system with reversed arrangement of handle and cylinder

The lever-operated multisafe 869 is surprisingly easy to use. This is because the cylinder has been arranged above the lever handle. This locking system is suitable for both main and secondary entrance doors. The secondary locks are extended by pulling up the lever handle. They thus ensure the desired security and a permanent tightness of the door. Additional security plus: For opening from the outside, the latch can only be retracted using the cylinder key.

Locking: The latch is locked by operating the handle upwards. Then, to secure the latch, the main bolt is extended with one turn of the key.

Unlocking from the outside: To unlock, the deadbolt is retracted with the cylinder key and then the other locking points are retracted by operating the lever handle downward. The latch is retracted with the cylinder key.

Unlocking from the inside: For unlocking, the latch bolt is retracted with the cylinder key and then the further locking points are retracted by operating the lever handle downwards. The latch is retracted via the lever handle.