OKS Spezialschmierstoffe GmbH

MoS₂ Mineral Oil Concentrate

OKS 300 is a MoS₂-Mineral Oil Concentrate, an additive to gear, engine and machine oils.

• Lubricating oil additive for heavily loaded friction and rolling bearings for increasing the lubricating effect, improving the high-pressure properties and reducing the temperature increase
• Gear oil additive to guard against gearwheel damage Stops pitting and is especially suitable for gearbox designs with a high percentage of sliding
• Engine and compressor oil additive for reduced wear and increased operating safety, as run-in and smoothing lubricant
• Machining oil additive for chip-free or cutting production to increase working speeds and tool life

• Excellently suited as performance-increasing additive, as additive to bed track oils, engine oils, C/CC oils and slightly alloyed industrial oils
• Highly effective due to finest, homogeneous MoS₂ distribution in the oil
• Broad range of uses with many different oils and alone as a high-performance oil
• Lowest friction due to high lubricating effectiveness of MoS2
• Fully stabilised without precipitation, passes through common micro-filters, does not react to magnetic filters

• density (at 20°C): 0.92 g/cm³
• viscosity at (40°C): approx. 90 mm²/s

Applications
Shake or stir well before use. Depending on loading, add 1-2% to engine oils and 5-10% to machine- and gear oils. Instructions of the machine manufacturer have to be observed. Mixing will occur in operation. Only mix with appropriate lubricants. Not suitable with water-based lubricants and polyglycol oils.

• Plant and machine (tool) engineering
• Glass and foundry industry
• Municipal services
• Rail vehicle technology
• Rubber and plastic processing
• Shipbuilding and marine technology
• Logistics
• Paper and packaging industry
• Iron and steel industry
• Chemical industry