Catalog
BECOME A PARTNER
BECOME A PARTNER
Catalog

NORMTEILWERK ROBERT BLOHM GmbH

NORMTEILWERK ROBERT BLOHM GmbH

  • DIN ISO 9001:2015
  • REACh
  • RoHS

NORMTEILWERK ROBERT BLOHM GmbH

  • DIN ISO 9001:2015
  • REACh
  • RoHS

Back to the overview

Socket drill bushes DIN 173, part 1 (B0003) by NORMTEILWERK ROBERT BLOHM GmbH

Product inquiry  

Description

Material:special case hardening steel.

Finish:hardened to 780 ±40 HV 10 and ground.

Note:All plug-in drill bushes are labeled on the upper collar surface with the bore dimension and the fit dimension e.g. 15 F7.
The plug-in drill bush form K is used as a quick-change bush. Cylindrical pins or coiled spring pins are used in conjunction with the pan head screw to DIN 173 Part 1 as the mating surface for the stop pin.
The bayonet lock is secured by clamping bushes to DIN 173 Part 1 in conjunction with cap screws to DIN 912.

E2 = Hole spacing when using straight pins or coiled spring pins.

For diameters D1 above 15 mm, the increments are 0.5 mm.

Product inquiry  

More Products in the Area of Drill bushings

Cylindrical drill bushes DIN 179, form A or B (B0001)

Cylindrical drill bushes DIN 179, form A or B (B0001)

Description

Material:special case hardening steel.

Finish:hardened to 740 ±80 HV 10 and ground.

Note:

Flanged bushes DIN 172, form A or B (B0002)

Flanged bushes DIN 172, form A or B (B0002)

Description

Material:special case hardening steel.

Finish:hardened to 740 ±80 HV 10 and ground.

Note:

Clamping bushes DIN 173 Part 1 (B0004)

Clamping bushes DIN 173 Part 1 (B0004)

Description

Material:Clamping bush 1.0711.
Cheese head screw steel.

Finish:Clamping bush burnished.
Cheese head screw zi...

By using this website you agree to our use of cookies as described in our Privacy Policy.
I Agree