OKS Spezialschmierstoffe GmbH

Chuck Jaw Paste

Fully-synthetic chuck jaw paste for lubricating friction and sliding points under high and impact-loaded loads.

Areas of application

• Long-term lubrication of dirt-sensitive sliding points under vibration stresses
• Particularly suitable for lubricating chucks on tool machines
• Broad range of uses at stress-loaded parts, also at contact with cooling lubricants
• Lubrication of control and drive mechanisms
• Can be used at filling, labelling and packaging machines

Advantages and benefits

• Resistant to water, steam and aqueous cooling lubricants
• Prevents frictional corrosion reliably
• Highly effective due to optimum solid lubricant combination
• Minimal consumption due to formation of highly effective lubricating films

Technical specifications

• lower operating temperature: -45 °C
• upper operating temperature: 110 °C
• four-ball test rig welding load: 4,200 N
• thread friction coefficient (μ total): 0.1 (screw ISO 4017 M10x55-8.8 black-oxide, nut ISO 4032 M10-10 black-oxide)

Applications
For optimum adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply sufficient paste evenly to the functional surfaces with a brush, spatula, etc. The paste will also act as a sealant. Do not use paste instead of grease and mix only with suitable lubricants.

Industries

• Maintenance and servicing
• Glass and foundry industry
• Plant and machine (tool) engineering
• Logistics
• Chemical industry
• Rubber and plastic processing
• Municipal services
• Paper and packaging industry
• Shipbuilding and marine technology
• Iron and steel industry
• Rail vehicle technology