Catalog

Tecnospiro Machine Tool S.L.

Tecnospiro Machine Tool S.L.

Tecnospiro Machine Tool S.L.

Back to the overview

Pneumatic Tapping Machine (Roscamat 500RH) by Tecnospiro Machine Tool S.L.

Product inquiry  

This is the genuine unit to work in any position in space therewith always maintaining the perpendicularity to the desired plane irrespective of the arm position. The machine consists of a radial arm supporting both articulated arms that can be regulated by means of the regulating valves. The multiposition head is a double swivel joint device allowing to lock and unlock both its swivel pins to thus position the head and keep it quite blocked in order to thus operate in any position in space. The head mechanism is formed by a cam system with an equaliser and disc springs applying a load of 1,000 Kg to two cone sets locking both pins. The radial arm incorporates a chain drive, which is activated or deactivated by means of a face-toothed coupling half according to the intended working position. The machine incorporates an air servicing unit (filter + regulator + lubricator) for the correct operation of the motor. The modular system consisting in a series of 7 quick-change modules (reducers) is provided for coupling to said motor. As a result of this 7 output speeds (90, 170, 300, 550, 750, 1050 and 2100 rpm) are available thus allowing to adapt the tap speed to every type of thread. The modular system admits the quick-change tap holders with or without safety clutch depending on the intended job (blind or through holes). Threading capacity from M3 up to M2 to M24 (M27).

Product inquiry  

More Products in the Area of Tapping Machines

Pneumatic Tapping Machine (Roscamat 200)

This machine consists of a pendular parallelogram that is balanced by a pneumatic spring, plus a radial arm. The gas spring and radial arm ass...

Pneumatic Tapping Machine (Roscamat 400)

The machine, which can be easily fastened to a work bench or table using three M8 screws or a simple fastening clamp, consists of a radial arm with a 360º turning radius. It is connected to a vertical...

Pneumatic Tapping Machine (Roscamat 500)

As regards performance unit R-500 can be considered identical with unit R-400, with the advantageously bigger working range thanks to the longer arms. The machine consists basically of the following e...

Electric Tapping Machine (Roscamat 9001NC)

Along the same lines as with the pneumatic models, the machine is made up of a pendular parallelogram being balanced by an air spring plus a radial arm. The assembly being made up of both members fixe...

Electric Tapping Machine (Roscamat 6000)

The machine is formed by a tilting arm being by means of a pneumatic spring, said arm being fitted through an intermediary union to a radial arm being revolvable around 360º. The assembly is secured t...