Catalog

Hildebrand Prüf- und Meßtechnik GmbH

Hildebrand Prüf- und Meßtechnik GmbH

Hildebrand Prüf- und Meßtechnik GmbH

Back to the overview

Hardness Test Blocks (Type A, D, OO) by Hildebrand Prüf- und Meßtechnik GmbH

Product inquiry  

This kit will prove to be invaluable in helping to maintain durometer read-out accuracy for science, manufacturing, research and development. The test kit consists of 7 test blocks. The individual test blocks are provided with serial numbers to guarantee incontestable identification. The hardness values are ranging from 30 durometer to 90 durometer type A. As a reference check, it will indicate if a durometer is operating within tolerances. A durometer should never be calibrated with test blocks. For durometer calibration we recommend our Durometer Calibrator Model RC-1. The material from which the test blocks are made is fairly stable, however, it is strongly recommended that the calibration of the test blocks be verified annually.

  • 7 test blocks size approx. 54 mm x 54 mm x 8 mm
  • Custom made carrying case
Three test blocks with hardness values of approx. 60, 75 and 85 type D are available for testing durometer type D. An annual calibration of the test block is strongly recommended.

  • One Test Block approx. DIA. 51 mm x 9.5 mm
  • Custom made carrying case

Product inquiry  

More Products in the Area of Hardness Test Blocks

MICRO IRHD Test Blocks

Rubber Test Blocks according to MICRO IRHD ISO 48. The Rubber Test Blocks are only for a reference check to other samples and should be tested annually. Different MICRO IRHD ranges are available: