Catalog

Camille Bauer Metrawatt AG

Camille Bauer Metrawatt AG

  • DIN EN ISO 9001
  • DIN EN ISO 14001

Camille Bauer Metrawatt AG

  • DIN EN ISO 9001
  • DIN EN ISO 14001

Back to the overview

Galvanic Isolators (0 - 20 mA, 500 V | SINEAX TI816) by Camille Bauer Metrawatt AG

Product inquiry

DC signal isolator, passive, no power supply needed. Signal isolator for electrically isolating an analog DC signal, and for converting it to a current signal or a voltage signal depending upon the utilized device variant. Functions as a passive isolator without external supply power and draws its minimal energy requirements from the DC signal.
  • Electrical isolation of the analog DC signal (0(4) to 20 mA): prevents the formation of parasitic voltages and currents and eliminates grounding problems with interconnected and intermeshed signal lines.
  • Highly accurate: fulfills the isolation function with practically no transmission errors.
  • No auxiliary power terminals: eliminates the need to lay and connect power supply lines, well suited for subsequent retrofitting to signal circuits.
  • Small and compact for optimized space utilization
  • N12 type rail mount housing for G rail per EN 50 035-G32, or top-hat rail per EN 50 082

Product inquiry

More Products in the Area of Galvanic Isolators

Galvanic Isolators (SINEAX SI815)

Signal isolator for electrically isolating the 4 to 20 mA measuring/supply circuit of a measuring transducer with 2-wire connection.
The device fulfils two functions simultaneously. - It provides...