Camille Bauer Metrawatt AG

Manufacturer
Switzerland
Product inquiry

DIN EN ISO 9001
DIN EN ISO 14001

Manufacturer
Switzerland
Product inquiry

DIN EN ISO 9001
DIN EN ISO 14001

Absolute encoders (KINAX WT717) by Camille Bauer Metrawatt AG

Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft. A load-indepent DC-signal with a range of 4 to 20 mA is read out from the measurement output. The robust housing has made this unit ideal for machines, ship building, transport, construction of vehicles and in the chemical industry.

Patented contactless capacitive system, wear-free
Measuring range, direction of rotation, characteristics, output changeover and other functions can be programmed via PC: facilitates planning and project work, short lead times, minimal inventory
Angle of rotation measuring range: 0°...10° to 0°...50° or 0°...50° to 0°...350°
With gearbox 0...20° to 0...1555 revolutions
Measurement output (measuring/supply circuit) utilizes 2-wire connection (4 to 20 mA signal)
Simulation of measured value allows to test subsequent control circuits, control loops or measuring circuits during installation
Display of present measurands and graphical representation on screen for longer time periods
Adjustment of mechanical position and fine adjustment of the analog output, zero point and span may be set independently
Programmable output characteristics: linear, V-characteristic or freely selectable linearization curve
Shaft can be turned through full, no damage occurs even if the upper limit value of the measuring range is exceeded
Serial interface
Permissible static load on the shaft: max. 1000 N (radial), max. 500 N (axial)
Surface mounting device in rugged housing (IP67): vibration and shock resistant

More information

Absolute encoders (KINAX WT717) by Camille Bauer Metrawatt AG

More Products in the Area of Absolute encoders

Programmable shaft transmitter for angular position for heavy duty applications, dia. 58 mm. The KINAX WT 720 converts the angular position of a shaft into a load independent direct current signal, pr...

More Information »

Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft. A load-independent DC signal with a range of 4 to 20 mA is read out at the measurement...

More Information »

More Information »

Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft. A load-independent DC signal with a range of 4 to 20 mA is made available at the measur...

More Information »

Transmitter with a contact free, capacitive sensor system for the acquisition of the angular position of a shaft. The output is a load-independent DC current signal of 4...20 mA proportional to the me...

More Information »