Transducers (SINEAX F535)
Camille Bauer Metrawatt AG
Transducers (SINEAX F535) by Camille Bauer Metrawatt AG
Transducer for the conversion of the difference in frequency from two electrical systems requiring synchronization into a direct current or voltage signal which is proportional to the measured value.
- Measurement inputs for sinusoidal, square-wave or distorted nominal input voltages with dominant fundamental wave
- Input voltage: 10 to 690 V
- Auxiliary power: 85 to 230 V AC/DC
- Input frequency response time periods: 4 Measuring range limits: df ± 1% fS to ± 80% fS, fS and fG= 10 Hz to 1.5 kHz fS = bus bar frequency, fG = generator frequency
- Measurement output available with unipolar, bipolar or live-zero output quantities
- Measuring method: digital period of oscillation measurement
- Power supply: integrated AC-DC power pack with large tolerance range for universal use
- Housing for top-hat rail mounting
- Certifications: CSA, GL (Germanischer Lloyd)
More Products in the Area of Transducers
Measuring transducer for the transformation of alternating current, self-powered.
- Measurement method: Rectifier process
- Measurement input: Alternating current, sinusoidal, ari...
Measuring transducer for the transformation of sinusoidal alternating voltage, with power supply terminal.
- Measurement method: rectifier process Measurement input: alternating voltage s...
Measuring transducer for the transformation of sinusoidal alternating voltage, self-powered.
- Measurement method: rectifier process
- Measurement input: alternating voltage, sinu...
Measuring transducer for the conversion of sinusoidal or distorted alternating voltage into an output signal which is proportional to the measured value. Depending upon the variant, the crucial portio...
Measuring transducer for the transformation of sinusoidal or distorted alternating voltage - with power supply terminal.
- Measurement method: logarithmic process
- Measurement in...
|
Address
Aargauerstrasse 7
5610
Wohlen
Switzerland
|
|
|
Business Type
Manufacturer
|
|
|
Export Regions
Worldwide
|
|
|
Certificates
DIN EN ISO 9001 DIN EN ISO 14001
|
|
|
Foundation
1944
|
|
|
Management
Max Ulrich René Weber Stefan Gall
|
|
|
Employees
89
|
About Camille Bauer Metrawatt AG
Camille Bauer has long years of experience in the development of instruments which must operate precisely in all external conditions: Our products feature maximum safety for the operating staff and standard aligned functioning under different site and ambient conditions. Highly precise EMC and environmental tests can be conducted at our own test laboratories. In addition, we have the safety and quality of our instruments again and again documented by external accredited test laboratories as well as independent international certification bodies.