Product inquiry
High-Temperature Chain Lubricant for the Food Industry
OKS 387 is a high-temperature chain lubricant with graphite for strongly loaded lubrication points at extreme temperatures.
Areas of application
- Lubrication of highly stressed chains, joints or slideways at higher temperatures
- For conveying systems running beneath radiated heat, in baking and drying lines in the foodstuffs industry
- Dry lubrication at operating temperatures above 200°C
- The synthetic oil content evaporates odorlessly without leaving residues, while the solid lubricant content are left behind to carry out dry lubrication
Advantages and benefits
- Highly suitable as a high-temperature lubricant
- Highly effective due to homogeneous distribution of the finest graphite throughout the oil
- Versatile application as a liquid lubricant under high temperature conditions
- Resistant to water, chemicals, fuels, lubricants, and hydraulic oils
- NSF H1 registered
- MOSH/MOAH-free (as per recipe)
Technical specifications
- upper operating temperature: 150 °C (liquid lubrication)
- density (at 20°C): 1.04 g/cm³
- viscosity at (40°C): 170 mm²/s
- four-ball test rig welding load: 2,800 N
ApplicationsFor best results, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. If at all possible, avoid excess. The manufacturer´s instructions should be observed. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants.
IndustriesNo matter what industry you come from, we at OKS have the right solution for you.
- Catering equipment and food processing technology
- Glass and foundry industry
- Iron and steel industry
- Logistics
- Rubber and plastic processing
- Rail vehicle technology
- Shipbuilding and marine technology
- Chemical industry
- Municipal services
- Paper and packaging industry
- Plant and machine (tool) engineering