Catalog
BECOME A PARTNER
BECOME A PARTNER
Catalog

OKS Spezialschmierstoffe GmbH

OKS Spezialschmierstoffe GmbH

  • ISO 9001:2015
  • ISO 14001:2015
  • ISO 45001:2018

OKS Spezialschmierstoffe GmbH

  • ISO 9001:2015
  • ISO 14001:2015
  • ISO 45001:2018

Back to the overview

High Temperature Greases (OKS 418) by OKS Spezialschmierstoffe GmbH

Product inquiry  

High-Temperature Grease

OKS 418 is an economic hot bearing grease for lubrication of friction and rolling bearings at higher temperatures.

Areas of application

  • Grease lubrication of plain and rolling bearings at high temperatures, e.g. in painting and drying ovens, converters, pouring ladles, heating systems, hot-air fans, charging cranes, vulcanising systems and electric motors
Advantages and benefits
  • Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading
  • Highly effective due to optimum solid lubricant formula
  • Broad range of uses above normal grease performance areas
  • Reduced maintenance and lubricant costs due to possible safety lubrication
  • Drip-free hot bearing grease for long-term and safety lubrication in a broad temperature range
Technical specifications
  • lower operating temperature: -25 °C (< 1,400 hPa)
  • upper operating temperature: 150 °C (F50 (A/1500/600), 100h)
  • consistency: 2 NLGI grade (DIN ISO 2137)
  • viscosity at (40°C): 220 mm²/s (base oil)
Applications
For best results clean the lubricating point carefully. Clean with solvents like OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection ahead of the initial filling. Fill the bearings in a way that all the functional surfaces for sure get the grease. Slow moving bearings(DN-value < 50,000) should be filled completely, normal moving bearings should be filled to 1/3 of the free inner housing space. Observe the instructions of the bearing or machine manufacturer. Relubrication with a grease gun on to the grease nipples or with an automatic lubrication system. Relubrication intervals and amount to be defined acc. to the service conditions. If the removal of the old grease is not possible the amount of grease has to be limited to avoid excess lubrication of the bearing. At longer relubrication intervals a complete exchange of the old grease is recommended. Only mix with appropriate lubricants.

Industries
No matter what industry you come from, we at OKS have the right solution for you.

  • Paper and packaging industry
  • Municipal services
  • Rail vehicle technology
  • Plant and machine (tool) engineering
  • Rubber and plastic processing
  • Logistics
  • Shipbuilding and marine technology
  • Glass and foundry industry
  • Chemical industry
  • Iron and steel industry

Product inquiry  

More Products in the Area of High Temperature Greases

High-Performance and High-Temperature Grease (OKS 404)

High-Performance and High-Temperature Grease (OKS 404)

High-Performance and High-Temperature Grease

Semi-synthetic lithium complex soap grease with a wide range of applications in a wide range of temperatures.

High-Temperature Multipurpose Grease (OKS 420)

High-Temperature Multipurpose Grease (OKS 420)

High-Temperature Multipurpose Grease

OKS 420 is a high-temperature grease for universal use at increased requirements.

Areas of application

...

Synthetic High-Temperature Grease (OKS 424)

Synthetic High-Temperature Grease (OKS 424)

Synthetic High-Temperature Grease

Synthetic grease for bearing points subject to extremely high temperatures and corrosive environmental influences.

Area...

High Melting-Point Grease (OKS 432)

High Melting-Point Grease (OKS 432)

High Melting-Point Grease

OKS 432 is a readily dispensable high melting-point grease for rolling and friction bearings and similar components in humid environments, under h...

High-Temperature Grease for Food Processing Technology (OKS 479)

High-Temperature Grease for Food Processing Technology (OKS 479)

OKS 479 is a fully synthetic grease for food processing technology that is used to lubricate rolling and friction bearings as well as other machine elements under increased operating temperatures.

By using this website you agree to our use of cookies as described in our Privacy Policy.
I Agree