OKS Spezialschmierstoffe GmbH

• Sealant and lubricant for cold and hot-water valves in vehicle heating systems or cooling circuits and for ground seals on glass taps and desiccators
• Lubrication of O-rings and rubber seals for assembly and during operation
• Lubrication of plastic parts

• NSF H1 registered
• Tasteless and odourless
• Highly effective due to excellent adhesion on all materials
• Neutral behaviour with regard to plastics and elastomers
• Completely EPDM-compatible
• High long-term stability without drying out, hardening or bleeding
• Resistant to cold and hot water, as well as acetone, ethanol, ethylene glycol, glycerine and methanol
• MOSH/MOAH-free (as per recipe)

• lower operating temperature: -40 °C
• upper operating temperature: 200 °C
• consistency: 3 NLGI grade (DIN ISO 2137)
• viscosity (at 40°C): 9,500 mm²/s (base oil)
• UFI: 3DQ2-V05Q-X009-9JGX

Clean the lubricating points well for optimal effect. Apply the grease evenly and thinly to the functional surfaces with a brush, spatula, etc. Avoid excesses. In as far as available, observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants. Caution: Plastic based on silicone, such as silicone rubber can be attacked by silicone grease. Silicone grease may not be used at sliding points under pure oxygen influence.

No matter what industry you come from, we at OKS have the right solution for you.

• Catering equipment and food processing technology
• Shipbuilding and marine technology
• Logistics
• Chemical industry
• Paper and packaging industry
• Iron and steel industry
• Rail vehicle technology
• Glass and foundry industry
• Municipal services
• Plant and machine (tool) engineering
• Rubber and plastic processing