OKS Spezialschmierstoffe GmbH

• Lubrication of closed toothed gearin
• Liquid lubrication of chains, joints, guides, rolling and friction bearings
• Suitable for immersion-bath, immersion-bath circulation and injection lubrication

• NSF H1-registered
• Good ageing and oxidation stability through optimal additives
• Cold and hot water resistant
• Resistant to water steam, disinfectants and cleaning agents
• Wide operating temperature range
• Shear-stable and low-foaming
• Good wear protection
• Good corrosion protection
• Long economic operating times
• MOSH/MOAH-free (as per recipe)

• lower operating temperature: -30 °C
• upper operating temperature: 120 °C
• density (at 20°C): 0.86 g/cm³
• viscosity (at 40°C): 220 mm²/s
• FZG wear protection test: > 12 power level (A/8,3/90)

Clean the lubricating point thoroughly for optimal effect. Before filling gears for first time, remove anti-corrosion agent. Fill the gears so that the immersing teeth transport the lubricant reliably. Apply a sufficient amount of lubricant with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Observe the gear and machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions. Only mix with suitable lubricants.

No matter what industry you come from, we at OKS have the right solution for you.

• Catering equipment and food processing technology
• Plant and machine (tool) engineering
• Logistics
• Shipbuilding and marine technology
• Paper and packaging industry
• Glass and foundry industry
• Rail vehicle technology
• Chemical industry
• Municipal services
• Iron and steel industry
• Rubber and plastic processing