The smallest representatives of the servo compensating couplings or shaft couplings, the miniature couplings, are designed to compensate for the offset or axial displacement of two axes or shafts.

Depending on the design, they are used in different areas such as tachos, stepper motors, NC axes, potentiometers, robot drives, handling devices, angle encoders or servo drives. They are available as bellows, elastomer or cross-slide couplings and are attached to the shaft using a clamping ring or grub screw.

As metal bellows couplings, the miniature couplings transmit high speeds completely backlash-free and maintenance-free. They are characterized by their high torsional stiffness and low mass moment of inertia, which enables high speeds to be transmitted at a precise angle and without backlash.

The compact elastomer miniature couplings are ideal for even larger shaft misalignments. They are pluggable, backlash-free and flexible, also have good vibration damping properties and are electrically insulating. This also characterizes the cross slide couplings, which, in addition to their short length, also offer a large displacement capacity and low restoring forces. As the couplings can be plugged in, any combination of different bore diameters is possible.

In normal operation, the couplings are maintenance-free and, if installed correctly, JAKOB miniature couplings have an almost unlimited service life.

The tried and tested modular system and the fact that all common diameters are kept in stock guarantee the shortest possible delivery times.