Welded, hot-dip galvanized frame made of square tubes and U-profiles with V-drawbars; single-axle chassis; maintenance-free German axles with soft rubber suspension and high inherent damping; overrun brake with automatic reverse and parking brake; hydraulic system with hand pump and 4-stage cylinder for tipping angle approx. 45° to the side and approx. 50° to the rear; flatbed floor made of waterproof, glued screen printing plate with anti-slip coating on one side; side walls optionally made of galvanized sheet steel or high-strength e-brake. 50° at the rear; platform floor made of waterproof glued, one-sided anti-slip coated screen printing plate, 18 mm thick; side walls optionally made of galvanized sheet steel or high-strength anodized extruded aluminium profiles; rear wall and side walls optionally made of galvanized sheet steel or high-strength anodized extruded aluminium profiles; rear wall and side walls optionally made of galvanized sheet steel.profiles; rear wall and side walls foldable; lighting and signaling system (12V) installed damage-proof in hot-dip galvanized end cross member; 7-pin plug for electrical connection.

Three-way tipper in standard design with hand pump at the front right of the drawbar.

In accordance with the Machinery Directive, all tippers have undergone a conformity test and are equipped with a hose rupture safety device.