Automatic balancing system:

An air servo system is used to adjust the level automatically. Its outstanding feature is to feedback the response of the system to the micro-vibration to change the characteristics of vibration isolation, improve the effect of vibration isolation, and achieve the initial equilibrium state under the conditions of overload and partial load tests.

■ Large optical vibration isolation platform, the outer frame is made of medium-hard steel plate with high rigidity, small deformation and good welding performance. The vibration isolation layer is made of honeycomb structure material with low natural frequency and strong vibration resistance, which can greatly control the vibration response

■ The plate is made of high-magnetic stainless steel sheet, which is practical, beautiful and wear-resistant after fine grinding

■ The vibration isolation bracket is made of double-layer membrane airbag vibration isolation with large damping holes. Vibration isolation performance is good and stable, easy to adjust, automatic leveling, automatic inflation. The use of silent air compressor air source, low noise, suitable for the vibration frequency requirements of higher experimental places

■ Silent air source, low noise (less than 65 dB)

flatness: <0.05mm/m2

■ Surface roughness: <0.8 μ m

natural frequency: Vertical 1.2Hz ~ 1.8Hz, Horizontal 1.2Hz ~ 1.8Hz

amplitude: <1.2 μ m

repeat accuracy of the positioning: +0.05 mm

■ Air pressure: 0.2-0.6 (Mpa)

Specification:

Specification model, length-width-height, remarks

PT02 - 600x600x80
600-600-800
4 Bracket M6 screw Hole spacing 25mm
PT02 - 750x750x80
750-750-800
4 bracket M6 screw hole spacing 25mm
PT02 - 900x600x80
900-600-800
4 spacers M6 screw hole spacing 25mm
PT02 - 1200x800x100
1200-800-800
4 spacers M6 screw hole spacing 25mm
PT02 - 1500x1000x100 1500-1000-800
1500-1000-800
4 spacers M6 screw hole spacing 25mm
PT02 - 1800x1200x150
1800x1200x150
4 spacers M6 screw hole spacing 25mm
PT02 - 2000x1000x150
2000-1000-800
4 spacers M6 screw hole spacing 25mm
PT02 - 2000x1200x150 2000-1000-800 4 holders M6 screw hole spacing 25mm
2000x1200x150 2000-1200-800
4 spacers M6 screw hole spacing 25mm
PT02 - 2000x1500x150 2000-1500-800
2000x1500x150 2000-1500-800
4 spacers M6 screw hole spacing 25mm
PT02 - 2400x1200x200
2400x1200x200
4 spacers M6 screw hole spacing 25mm
PT02 - 2400x1500x200 2400-1500-800 4 stands M6 screw hole spacing 25mm
2400-1500-800
4 spacers M6 screw hole spacing 25mm
PT02 - 3000x1000x250
3000-1000-800
6 Holder M6 screw Hole spacing 50mm
PT02 - 3000x1200x250
3000x1200x250 3000-1200-800
6 spacer M6 screw hole spacing 50mm
PT02 - 3000x1500x250
3000-1500-800
6 spacers M6 screw hole spacing 50mm
PT02 - 3500x1200x250 3500-1200-800 6 Holder M6 screw hole spacing 50mm
3500x1200x250 3500-1200-800
6 Spacer M6 screw hole spacing 50mm
PT02 - 3500x1500x250 3500-1500-800 6 Holder M6 hole spacing 50mm
3500-1500-800
6 spacer M6 screw hole spacing 50mm
PT02 - 4000x1500x250 4000-1500-800
4000x1500x250 4000-1500-800
6 spacers M6 screw hole spacing 50mm
PT02 - 4500x1500x300
4500-1500-800
6 spacers M6 screw hole spacing 50mm
PT02 - 5000x1500x300 5000-1500-800
5000-1500-800
8 Holder M6 screw hole spacing 50mm
PT02 - 6000x1500x300 6000-1500-800
6000-1500-800
8 Spacer M6 screw hole spacing 50mm
PT02 - 8000x1500x300 8000-1500-800 8 Holder M6 hole spacing 50mm
8000-1500-800
8 Holder M6 screw hole spacing 50mm