Hot rolled 1050/1060/1050A aluminum strip manufacturer

Aluminum strips for dry-type transformer windings are mainly made from aluminum ingots that are smelted and then rolled and cut. High-quality pure aluminum is used as raw material. Common grades include 1060, 1050, 1050A, 1070, 1070A, 1350, etc. The state is usually O state. (Indicates soft state).

Advantages of aluminum strips for dry-type transformer windings:

1. Reduce costs: The price of aluminum is lower than that of copper. Using aluminum strips can significantly reduce transformer manufacturing costs, especially for large equipment.
2. Light weight: The density of aluminum is one-third that of copper, and aluminum strip winding makes the transformer lighter and easier to transport and install.
3. Good corrosion resistance: An aluminum oxide layer forms on the aluminum surface, which can reduce corrosion and extend service life.
4. Flexible design: Aluminum strips can increase the cross-sectional area and have electrical conductivity comparable to copper windings, making design and manufacturing more flexible.

Why choose transformer aluminum strips produced by MC Aluminum?

1. The surface of the aluminum strip should be smooth, flat, free of burrs, oil and dust.
2. Defects such as corrosion, oil spots, cracks, cracked edges, bubbles, holes, etc. are not allowed.
3. The surface coating of the aluminum strip (if any) should be uniform and firm, without falling off or cracking.