This is a wireless motion detector. This detector is designed based on the principle of infrared spectrum of the human body and the Doppler mobile detection technology. It is designed by special filter lens and advanced signal analysis technology. When the intruder moves within his detection range, the sensor will automatically detect and send alarm signal.
The product package contains the bracket and installs the bracket on the device. Install the product on the wall of 2-2.5 meters away from the ground. When the device is in a defense state, it is detected that someone breaks in. The device indicator will flash the red light, and the device will send the message to the host.You will receive a push notification.

1. Specifications:

Trigger Conditions: Tamper switch, low voltage, sensor

Infrared Sensor: Dual passive infrared pyroelectric sensor

Detection Range: Wide-angle lens Max. 12m

Detection Angle: 100° Wide angle lens

Alarm Interval: 10s/1min/5min/10min

Working Voltage: DC3V

Working Current: ≦30MA

Static Current: ≦25uA

Battery Life: 2 years

Working Temperature:-10℃ ~ +50℃

Relative Humidity: ≦90%

Indicator: infrared trigger, low voltage, charging state

RF Frequency: 433.92MHZ

Frequency Modulation Mode: ASK

Transmit power: 10db

Wireless distance: ≦120m (open area)

Dimensions: 107*57.4*37mm