HEINRICH KIPP WERK GmbH & Co. KG

HEINRICH KIPP WERK presents another new development from the locking bolt product group: Models are now being launched on the market in which the disengagement of the bolt is implemented by means of an eccentric lever. When the user moves the eccentric lever beyond the dead centre of the eccentric, the bolt disengages. Advantages of the new locking bolts are the ergonomic design, the flat construction, a high temperature resistance as well as the quick adjustment.

The locking pin remains disengaged when the handle lever is moved beyond the dead center of the eccentric. The operator can conveniently disengage one pin at a time without having to hold all handles in the extended position.

This feature is otherwise only found on locking bolts with a detent groove, but the handle must be turned in the pulled position - so the process takes longer. Products with eccentric levers, on the other hand, are suitable for convenient quick adjustment.

Another plus point is the ergonomic shape of the eccentric handle, which allows easy handling with little effort.

The eccentric handles can be rotated through 360° and are significantly flatter than mushroom or T-handles when not in use. This also allows recessed mounting of the products, thus avoiding interfering contours.

The handle levers are available in black and traffic red and are made of glass-fibre reinforced plastic. This plastic is resistant to high temperatures and allows continuous service temperatures of approx. 160 °C and short-term service temperatures of max. 250 °C. With regard to the threaded sleeves and locking pins, the user can choose between steel and stainless steel versions. All threaded sleeves are available with fine thread and in 4 sizes (M10x1 / M12x1,5 / M16x1,5 / M20x1,5).