JAKOB Antriebstechnik GmbH
13.07.2022 01:07
The metal bellows coupling series KP with 4-corrugated bellows and two radial clamping hubs, is a version with short overall length in the JAKOB coupling range. This makes it particularly suitable for applications with minimal shaft spacing and limited installation conditions. In addition, the very high torsional rigidity and the easy-to-install clamping hub design are worth mentioning. A low moment of inertia and good values for the permissible shaft misalignments and restoring forces complete the positive picture.
The multi-layer, made of certified stainless steel, metal bellows is characterized by its high torsional rigidity as well as the compensation of axial, radial and lateral shaft offsets. Due to the shortened design and the resulting weight savings, there are other advantages such as lower moments of inertia.
The clamping hub is made of high-strength aluminum to achieve the lowest possible moment of inertia. The hubs are equipped with the innovative and service-friendly Easy-Clamp-System. It guarantees a simple, with enough fitting tolerance provided postponement. A single, radially accessible screw per hub provides the for torque transmission necessary preload force. Thanks to this simple, but very reliable connection, the couplings can be mounted in just a few easy steps, even in difficult installation conditions. The bellows-hub connection is made by the optimal and backlash-free brass-wire press-fit method. In contrast to adhesive joints, this joining process is absolutely unlimited for critical operating conditions (-40 ° C to + 200 ° C, chemicals) and the transmission torque of each individual bellows layer is safely introduced into the hub.
The KP series is available for nominal torques from 25 to 900 Nm with bore diameters from 10 to 75 mm.
17.04.2024 01:00
Popular series more variable KG-VA, KGH und KGEThe versatile metal bellows couplings of the KG-VA, KGH and KGE series from JAKOB Antriebstechnik...
30.03.2024 01:05
KXL metal bellows coupling - Achieves great things14.03.2024 01:00
Resistant - EKM-VA elastomer couplingJakob's product range of elastomer couplings has been expanded to include a new variant, the EKM-...
09.03.2024 02:10
SKB-KP - Torque limiter for direct drives extendedThe proven SKB-KP series safety coupling has been in use for decades as mechanical protection for...
28.02.2024 02:10
Reliable and cost-effectiveFor decades, it has proven itself on the market as a reliable and cost-effective standard series...
01.02.2024 01:05
How to select a suitable servo coupling