E+E Elektronik Ges.m.b.H.
E+E Elektronik Ges.m.b.H.
22.03.2021 01:03
The Sigma 05 acts as a sensor hub for E+E Elektronik’s intelligent Modbus probes. It makes it easy to set up a modular sensor platform with up to three probes and five measurands. The Sigma 05 supports E+E sensing probes for CO2, humidity, temperature, ambient pressure and air velocity, making it suitable for a wide range of applications.
Plug-and-Play Sensor Platform with Automatic Probe Discovery
The Sigma 05 can centrally manage up to three sensing probes with an RS485 interface and the Modbus RTU protocol. Compatible E+E sensing probes are automatically identified by the sensor hub and are immediately ready for use. Of the total of five supported physical quantities, three can be assigned to the graphic display and two to the freely configurable analogue outputs.
The sensing probes can be connected to the Sigma 05 either directly or via an M12 cable. Connecting and replacing the intelligent probes is quick and easy thanks to the plug-and-play functionality.
Easy Software-Based Configuration and Adjustment
The new PCS10 configuration software gives the user full access to the sensor platform. This allows for convenient PC-based assignment of physical quantities, scaling of analogue outputs, adaptation of the display layout, setting of threshold values and adjustment of the connected sensing probes. The software is available free of charge on the E+E Elektronik website.
Reference Probe and Loop Calibration
A special reference probe is available for a functional and accuracy check of the Sigma 05 or the entire measurement chain. The probe supplies fixed values for various physical quantities, is configurable using the PCS10 software and is automatically detected by the sensor hub.
The Sigma 05 supports easy, FDA-compliant loop calibration in the field. The cables facilitate on-site calibration of the connected probes in a portable calibrator.
High Quality and Flexibility
The Sigma 05 features a rugged IP65/NEMA 4 enclosure and is available with or without a display. With the various, high-quality E+E sensing probes, it can be used in HVAC, clean room or agricultural applications, for example. Thanks to its modular plug-and-play design, the sensor platform offers a high degree of flexibility.
08.11.2023 00:00
New Room Sensor Generation by E+E ElektronikA trio consisting of the CDS201, HTS201 and TES201 sees Austrian sensor specialist E+E Elektronik...
15.09.2023 01:00
High-end humidity and temperature sensor for highest demandsWith the new HTS801, E+E Elektronik is launching its most powerful humidity and temperature senso...
Digital Sensing Module for Cost-efficient Humidity and Temperature Measurement
The HTM...
27.04.2023 17:00
E+E Elektronik GmbH at the Automation Expo, Indiafrom 26.04.2023 - 28.04.2023
Chennal Trade Center
Hall 3, Booth F31 - F32
Austrian sensor manufacturer E+E Elektronik is expanding its digital sensing element portfolio to...
04.08.2022 10:05
Calculator for Physical Humidity Quantities and Pressure Dew Point