Extended actuator and nominal size range of GEMÜ 567 BioStar control valve

GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG

"Extended actuator and nominal size range of GEMÜ 567 BioStar control valve " by GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG

The aseptic GEMÜ 567 BioStar control valve is now available up to a nominal size of DN25, thus allowing a maximum flow rate of 15 m³/h. At the same time, the selection of motorized actuators for this valve has also been extended.

In order to expand the product range of valves for hygienic, sterile and aseptic applications to include a highly precise control and regulating valve, GEMÜ, one of the world's leading manufacturers of valves, measurement and control systems, first developed a completely new sealing technology that provides the optimal addition to the established aseptic GEMÜ valve range. With 567 Biostar control, based on GEMÜ PD design, this novel generation of valves has been designed specifically for the control of small flow rates in the pharmaceutical, food, and biotech sectors.

The PD design means that the moving parts of the actuator are hermetically separated from the product area. This hermetic separation also enables the actuator to be replaced under pressure, with no risk of media contamination.

In addition to existing commercially available versions with manual and pneumatic actuators, the new motorized versions have now been fully developed for the market. The motorized version of the GEMÜ 567 Biostar control valve is the world's first real-time-enabled control valve. The combination of PD design and electric actuator as a stainless steel version makes this valve a top choice for the control of small volumes in the pharmaceutical and biotechnological industries, in applications without compressed air, or particularly for applications with stringent precision and speed requirements. The running times of the plants can be greatly extended thanks to the long service life of the PD diaphragm (more than 7 million cycle duties), the low-maintenance design and the operator replacement when medium is present. With the expansion of the range of nominal sizes to include DN 25, GEMÜ has now extended the kv range up to approx. 15 m³/h.

The GEMÜ 567 Biostar control valve is intended for all control processes in hygienic and sterile areas, right up to aseptic plants in the pharmaceutical, biotechnology, and food and beverage industries, as well as for industrial processes and corrosive media. The PTFE seal system means it is perfectly suited and completely harmless to be used with media containing oil and fats. The valve is suitable for the precise control of small quantities in medical and food engineering (milk, yoghurt, cheese production), the pharmaceutical industry, and in cosmetics. Due to the wide variety of combination possibilities of actuators, bus systems and controls, it can also be adapted for all possible processes according to customer requirements, including real-time applications.

More News

The Ingelfingen-based valve specialist GEMÜ is expanding its product range for oxygen applications
The Ingelfingen-based valve expert GEMÜ is offering a technically advanced solution for ball valves for manual operation with suitable position feedback. And these are already pre-assembled, preset and tested.
The ever-increasing variety of beverages, liquid foodstuffs and pharmaceuticals presents major challenges for plant operators and plant designers. Manufacturers are placing more and more emphasis on customized solutions when it comes to container shapes, in order to stand out from the competition. This also applies to plant design. Maximum flexibility is often incompatible with low conversion and maintenance costs.
The Ingelfingen-based specialist in valves has been awarded the title of "Global Market Leader" for yet another year, earning the distinction for 2018 as part of the global market leader index of the University of St. Gallen and the Academy of German Global Market Leaders.
The GEMÜ 1205 electrical position indicator in a flameproof enclosure is based on tried and tested engineering for use in demanding ambient conditions.
Address
Fritz-Müller-Strasse 6-8
74653
Ingelfingen-Criesbach
Germany
Business Type
Manufacturer
Export Regions
Worldwide
Certificates
DIN EN ISO 9001
DIN EN ISO 14001
Foundation
1964
Management
Fritz Müller
Gert Müller
Stephan Müller
Employees
1600

About GEMÜ Gebr. Müller Apparatebau GmbH & Co. KG

GEMÜ is one of the world's leading manufacturers of valves, measurement and control systems. Innovative products and customised solutions for process media control and regulation have helped to establish this globally focused, owner-managed, family-owned enterprise for over 50 years. GEMÜ is the global market leader in sterile applications for the pharmaceutical industry and the biotechnology industry.

A broad-based modular system means that more than 400,000 product versions can be combined with each other. This huge variety is reflected in the applications in which GEMÜ products are used: From sterile and hygienic processes and water treatment through to industries in the world of chemical industry and environmental systems, microelectronics or the manufacturing sector.

Today, the GEMÜ Group employs 1,600 staff members across the world. Manufacturing is carried out at six manufacturing sites in Germany, Switzerland, China, Brazil, France and the USA. With 27 subsidiaries and a large distributor network, the group is active in 53 countries across all continents.