DMO digital linear scale - reliable measurements in rough environments

DMO series digital scales by WayCon Positionsmesstechnik GmbH are accurate, magnetic length measuring devices. The full enclosure with IP65 rating keeps out dust, chips and water for significantly greater reliability and durability compared to optical measuring systems. Typical applications are metal- and woodworking, for example.

The sensor head moves along the moulding with a measurement range of 150 mm to 2000 mm. Since the magnetic measurement system is contact-free it also means no wear. The DMO by WayCon has resolutions of 5 µm, 50 µm or 100 µm, and an accuracy of ± 30 µm. The electronics integrated in the sensor head converts the sinusoidal signal from the magnetic sensor head into an HTL or TTL signal. The different signals (A, /A, B, /B, Z, /Z) can then be read with any standard control unit and optionally displayed on a WayCon position display.

Digital linear scales are particularly suitable for controlled tooling machines such as milling machines, grinders or lathes. Other potential applications for the DMO are industrial robot systems or precision applications on X-Y position tables. A guide bar with rod end bearings are included for easy mounting.

More News

14.02.2022 02:10

Inductive sensor LVDT LV-G - self-orienting rod end bearings for perfect adjustment

The tried-and-tested LVDT series LV by WayCon is being expanded with the LV-G, which is equipped with rod end bearings. Thanks to the rod end bearings, the inductive sensors can be directly attached to the object to be measured. Here, the self-orienting rod end bearings facilitate the absorption of transverse force. Attachment via rod end bearings is ideal for installation at the end of a piston rod or the base of a hydraulic cylinder. Regular relubrication of the rod end bearings by the customer can also prolong the life and increase process safety.

10.12.2021 02:10

Analog Signal Conditioner IMX – a device that’s three in one

With the IMX, WayCon Positionsmesstechnik offers a device that quickly converts input signals (position, frequency, SSI and speed) into absolute analog values. The analog variables of current and voltage can be scaled from 0/4 ... 20 mA and -10...+10 V respectively as desired.

09.07.2021 01:05

Laser Displacement Sensor LAS2-TM - Powerful sensors in a compact design

Laser distance sensors of the LAS2-TM series impress with their high precision and their miniature housing.

26.04.2021 02:10

Eddy current sensors EZ1000 - non-contact measurements for ATEX areas

Eddy current sensors of the EZ1000 series are designed for measurements under the toughest conditions and can be used in areas with explosion hazards. Thanks to the eddy current measuring principle, the measurement is contactless and is not affected by environmental influences such as water, dust or oil.

27.03.2021 01:05

Have you met TEDS?

TEDS (Transducer Electronic Data Sheet) plugs store sensor data like a conventional data sheet. Connected to a measuring amplifier, all required information about the sensor can be read out quickly, easily, and directly.

12.02.2021 06:30

Inductive sensors LVDT series LVISM - Hardly larger than a match

With a housing diameter of only 4 mm, the LVISM is one of the smallest LVDT sensors of its kind. Furthermore, with a length of 7 cm it is not even twice as long as a match.