GEDA Dechentreiter GmbH & Co. KG
Mertinger Strasse 60
86663 Asbach-B√§umenheim
Germany




GEDA Multilift P22 - GEDA Dechentreiter GmbH & Co. KG

The GEDA Multilift series, exhibited for the first time at bauma 2007, is now successfully established on the market and is used on construction sites worldwide. The series is now taking its success story to the next stage with the new GEDA Multilift P22. GEDA Multilift P22 = 2000 kg/22 people + 200 metres lifting height. This calculation always produces the right answer since all the tried-and-tested GEDA Multilift know-how has been incorporated into the development of the new device. For example, the full pre-installed base unit which is composed of a car, enclosure, flat cable bin and drive is delivered as one unit with perfect dimensions for container loading and for HGV transportation. Long assembly times are now a thing of the past, as work to assemble the device can start on-site immediately without any cabin components having to be assembled in advance. The GEDA Multilift P22 is constructed from its accessible roof. In order to reach the roof easily for assembly and inspection work, a ladder is attached to the car roof. The off-centre position of the trapdoor in the roof ensures an ergonomic working area when assembling the device. The new assembly car is practical and useful. This is a light aluminium car which is hooked onto the guard rail next to the mast and makes the assembly of the lift, in combination with the usual assembly crane, considerably easier. In contrast to larger passenger hoists, the Multilift only requires a few square meters of floor space. An additional baseplate that often even has to be concreted, is not necessary. With a maximum lifting speed of 54 m/min, the GEDA Multilift P22 transports materials with a weight of up to 2.000 kg or 22 people quickly and safely up and down. The comfortable platform size of 1.40 x 3.20 x 2.10 m also allows the transport of bulky goods, such as plasterboards for interior work. The standard, automatic control can, as an option, be replaced by the even more userfriendly landing call box or a call control from the landing. The Multilift P22 has been made even easier to use with its practical diagnostic system. Potential troubleshooting becomes unnecessary since the location of the malfunction is displayed via a pictogram in the LED display. As with all GEDA rack and pinion lifts, the automatic lubrication device is included in the GEDA Multilift P22 as standard. This considerably reduces the wear on the toothed rack and pinion.

The GEDA Multilift P22 complies with the European Machinery Directive and Product Standard EN12159. Ingenious flat cable system Easy transportation up to dizzy heights The patented GEDA flat cable system ensures the fast and safe transportation of people and materials with the Multilift P22 up to a height of 200 metres. But the use of a GEDA Multilift is also worthwhile in low-rise buildings. In lifting heights up to 100 metres, the cable is stored in the flat, space-saving cable bin. At construction projects from 100 metres height, the cable guided by the cable carriage, also patented, ensures reliable operation. Designed as a space-saving device, the carriage provides easy entry height at the lowest landing of only 450 mm. The low threshold height is therefore not lost with the installation of the cable carriage. The GEDA cable carriage can also be opened so that the cable can be inserted easily and cleanly which means that awkward and protracted threading through of the cable is consigned to the past. It goes without saying that safety devices such as the limit switch, speed-dependent safety gear, safety stop and and overload protection are part of the standard Multilift P22 features provided. Extra safety is also provided by the newly developed collision protection of the lift with the cable carriage.