HYDROKOMP Hydraulische Komponenten GmbH

Inadequate cleaned pipes and drillings cause for many malfunctions of hydraulic systems. In-line pressure filters in the supply pipe and also in the return pipe can prevent the failure of the hydrauli...

Connecting inserts with various nominal diameters are used, when two construction units on short distance shall be connected without standard screw connections. They are designed for hydraulic oil-cha...

Manual coupling systems are used on machine tools that operate with hydraulic jigs and fixtures but are not equipped with a hydraulic interface for the hydraulic oil supply of the jig pallet. All the...

Coupling elements are special installation parts, which are built directly into an installation housing. They prevent leakage when transmitting liquid or gaseous mediums. Many designs, various sizes/m...

MCS are used in machine tools. They serve as the interface for media transmission between the jig pallet and the loading-/unloading or machining station. Variations for depressurised coupling or press...

Coupling mechanisms are special installation parts, which are built directly into an installation housing. They prevent leakage when transmitting liquid or gaseous mediums. Many designs, various sizes...

The stationary coupling board is a subassembly of the "Manual Coupling System”. It is the operating element and it is used to lock both assemblies for the pressure transmission.

The application range of these valves is varied. With a combination of several valves on a mounting plate, expanded functions like e.g. pressure control valves or bypass check valves can be realized....

The pressure gauge with glycerin filling and screw plug is ideal for hydraulic monitoring stations with high dynamic pressure loads and vibrations. It offers high safety for reading purposes and funct...

Where small clamping systems without oil supply are to be implemented, the screw pump with threaded- or O-ring flange connection can be ideally integrated for pressure generation. The spindle can be o...

This double-acting hydraulic cylinder offers long piston strokes. It is available without/with adjustable damping and with special sealings. It can be expanded with flange plates as well as bearing su...

Pull cylinders are suitable for smaller plants which are tact-independent. An air supply line can be additionally connected to the housing. Pull cylinders are available in various designs with threade...