KTR Kupplungstechnik GmbH

Products and Services by KTR Kupplungstechnik GmbH (62)

- Precision measuring shaft for low torques
- Inaccuracy < 0,1 % of the measuring range
- Double channel speed measurement at 360 pulses/revolution
- Reliable values measured in the mac...
- DATAFLEXR 22 for low torques
- Contactless measurement
- Integrated speed signal
- Very wide signal band width
- Reliable values measured in the machine control, process control...
- DATAFLEX® 42 for middle torques
- Contactless measurement
- Integrated speed signal
- Very wide signal band width
- Reliable values measured in the machine control, process contr...
- „Typical clamping set“
- Axial fastening of the hub
- Clamping set for small radial mounting dimensions
- Increase of torque by using several clamping sets in a series
- Torsionally flexible, maintenance-free
- Damping vibrations
- Axial plug-in, fail-safe
- Allover machining – good dynamic properties
- Compact design/small flywheel effect
-...
- Hubs from steel, specifically suitable for drive elements subject to high loads
- Torsionally flexible, maintenance-free, vibration-damping
- Axial plug-in, fail-safe
- Allover machin...
- Shaft coupling with taper clamping bush
- Sliding fit facilitates the axial alignment of the coupling
- Short mounting length
- Easy assembly/disassembly of the coupling hubs
- E...
- For high shaft displacements, 3-part double-cardanic
- Reduced vibration and noise
- The restoring forces resulting from displacements are very low
- Increase of the total lifetime of...
- Shaft coupling AFN-SB special with disk brake for braking calipers
- Brake disk and spider can be replaced while being assembled
- Finish bore according to ISO fit H7, feather keyway accor...
- For all applications in the range of general engineering and hydraulics
- Maintenance-free due to the material combination nylon/steel
- Compensating for axial, radial and angular shaft mi...
- Double cardanic curved-tooth gear coupling
- Maintenance-free due to the material combination nylon/steel
- Compensating for axial, radial and angular shaft misalignment
- Type AS – s...

News

SYNTEX - NC - Overload System
KTR makes donations to hospice haus hannah, Emsdetten
Address
Rodder Damm 170
48432
Rheine
Germany
Business Type
Manufacturer
Export Regions
Worldwide
Certificates
DIN EN ISO 9001
DIN EN ISO 14001
Foundation
1959
Management
Prof. Dr. h. c. Josef Gerstner
Employees
850

About KTR Kupplungstechnik GmbH

As a leading manufacturer of high-quality drive and brake components as well as hydraulic components, KTR supplies mechanical couplings, clamping sets, torque limiters, measuring systems, hydraulic components and high-power brakes all over the world. With more than 50 years experience in power transmission we are trendsetters in the development of coupling technology and offer customised solutions to all industries. The KTR trademark characterises quality and innovation, speed, reliability, flexibility and a close working relationship with customers.